Walk-in Cooler, Freezer Insulated Panel Construction Detail: Wall, Ceiling and Floor. Modular design for easy assembly and disassembly.

 

 


Walk-in Cooler, Freezer Insulated Panel Construction Detail:

Walk-ins Coolers/Freezers Manufacturing Cam-Lock consists of a locking pin in one section, and a locking arm in the adjoining section. It is operated with a standard allen wrench. The locking pin is a steel rod, positioned so that the hooked end of the locking arm hooks over it and engages it tightly. A half turn with the hex center allen wrench rotates the locking arm and thus engages or disengages the lock.

All Walk-ins Coolers/Freezers Manufacturing panels are U.L. listed and labeled. The modular design allows for easy assembly and disassembly. One piece corners ensure structural integrity. Cam lock connectors and NSF approved double bulb gaskets are permanently bonded to the panel behind the metal skins to ensure a quick and tight seal. All standard 7 ft. wall panels have a minimum of three (3) cam locks, each designed to withstand 1,400 pounds of pull test. Buck openings are framed in ABS plastic trim. Indoor floorless walk-ins are supplied with precut, mitered and numbered vinyl floor screeds.

Polystyrene is the standard insulation for coolers. It is the most cost efficient insulation for a cooler application (Polystyrene vs. Urethane Cost Benefit Analysis available upon request). Polystyrene will not absorb moisture, and moisture reduces its insulation capability. Polystyrene also has a lower smoke and fire rating than urethane foam.

 

When insulation value of urethane is required, as in a freezer application, Walk-ins Coolers/Freezers Manufacturing 's solid-core urethane is identical to foam-in-place urethane in its insulating value, while offering the added benefits of flexibility in size and shape.

 

Floor Panel Construction.

The construction of the Walk-ins Coolers/Freezers Manufacturing floor panel is similar to our walls and ceilings with regard to the manufacturing technique. The difference is that Walk-ins Coolers/Freezers Manufacturing manufactures an NSF floor which may be ordered in 16 gage stainless steel or 10 gage Aluminum. The Walk-ins Coolers/Freezers Manufacturing floor panel is designed to withstand up to 700 pounds per square foot of evenly distributed weight. The floors are joined with cam locks and are sealed with NSF double bulb gaskets. All Walk-ins Coolers/Freezers Manufacturing floor panels are UL listed and labeled. Walk-ins Coolers/Freezers Manufacturing also manufactures a non-NSF 16 gage galvanized steel floor for non-NSF applications.Walk-in Cooler, Freezer Insulated Panel Construction Detail: Walk-in Cooler, Freezer Insulated Panel Construction Detail: Walk-in Cooler, Freezer Insulated Panel Construction Detail:  Walk-in Cooler, Freezer Insulated Panel Construction Detail: Walk-in Cooler, Freezer Insulated Panel Construction Detail: Walk-in Cooler, Freezer Insulated Panel Construction Detail:

 

Walk-ins Coolers/Freezers Manufacturing 's wall and ceiling panels are constructed of mill embossed aluminum that is permanently laminated to solid core polystyrene or urethane. All Walk-ins Coolers/Freezers Manufacturing Panels are tongue and groove and modular in design. They have a minimum of 3 cam-locks per 7 ft. wall. Each cam-lock is designed to withstand 1,400 pounds of pull test. NSF approved double bulb gaskets are permanently sealed in place behind the metal skins. All Walk-ins Coolers/Freezers Manufacturing panels have a 10 year panel warranty.

 

See Walk-in Cooler, Freezer Installation Manual for more detail.

Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.

 

Walk-ins Coolers/Freezers Manufacturing ,

Please Call Us


US Toll Free

1-800-717-3805

US Toll Free Fax
1-877-525-3839

 

E-mail: info@walkinrefrigeration.com
© Walk-ins Coolers/Freezers Manufacturing ,1997- 2011

Price Quote Request Form || Hardware and Accessories || Insulated Panels Detail ||
Walk-in Coolers/Freezers || Cold Storage Doors || Personnel Doors || Refrigeration Equipment ||
ThermalFlex Swing Door

 

 

 

Walk-in Cooler, Freezer Insulated Panel Construction Detail:
Wall, Ceiling and Floor. Modular design for easy assembly and
disassembly.Walk-in Cooler, Freezer Insulated Panel Construction Detail: